CNC Automatic Double Headed Spinning Machine with Pipe Bender

1.SUMMARY

The spinning machine adopts special CNC control system, which can control 2 axes (X axis, Z axis) movements at the same time. The machine can form pipe-end into stated shape according to machining requirements. It is full automatic equipment used to form pipe with features of high performance, performance stability, high precision, good repeat and long life-span. It is mainly applied to the machining of air-condition, water heater, refrigerator and automobile's liquid storing wares, desiccant bottles as well as mufflers.

2. MAIN TECHNICAL PARAMETER

NO.	item	Index
1	Max machining pipe diameter	φ40 mm(copper)
2	Max machining w. thickness	1.5 mm
3	Machining units	1
4	Machining time	5~30S
5	X-axis travel	200 mm
6	Z-axis travel	100 mm
7	X-axis locating precision	±0.05 mm
8	Z-axis locating precision	±0.05 mm
9	X-axis speed	300 mm/S
10	Z-axis speed	100 mm/S
11	Clamping mode	turning oil -cylinder of hydraulic hollow-core
12	Machining mode	Rotating cool rolling
13	Power capacity	AC380V±10%,60 HZ,7.7 KW
14	Hydraulic motor power	1.5KW
15	Main-shaft motor power	3.7KW
16	Hydraulic system pressure	5 ~7MPa
17	Overall dimension	length2200×width1300×hight1500(mm)
18	weight	600 kg

3. MECHANISM STRUCTURE
3.1 X -axis
To be driven by AC servomotor through gear reducer.
3.2 Z -axis
To be driven by AC servomotor through gear reducer.
3.3 Clamping mechanism
To be driven by turning oil cylinder of hydraulic hollow-core
3.4 moving mechanism
To be driven by air cylinder, model: SMC L -MDBIB40-100
3.5 Collecting mechanism
To be driven by air cylinder, model: SMC CDM2B20-200
3.6 locating mechanism
To be driven by air cylinder, model: SMC CDQ2A32-45D
3.7 material- pushing mechanism
To be driven by cylinder, model: SMC CDM2B20-200
3.8 Core -allocating device
To be driven by cylinder, model: SMC L -MDB1B40-200

4. ELECTRIC STRUCTURE
4.1 Power supply :Three phase AC380V±10%
4.2 Servo motor
4.2.1 Servo motor of X-axis
Power supply: Three-phase 220V 50HZ, Power: 0.5 KW, 2000 r/min
4.2.2 Servo motor of Z-axis
Power supply: Three phase AC 220V 50HZ, Power: 1.0 KW .3000 r/min
4.3 Control valve of air pressure electromagnetism
Voltage: DC24V
4.4 System power supply
Voltage: DC24V

CNC Automatic Double Headed Spinning Machine with Pipe Bender