Automatic CNC Two Head Metal Chip-less Tube Pipe Cutting Straightener Machine
This Automatic CNC Two Head Metal Chip-less Tube Pipe Cutting Straightener Machine is a high-efficiency integrated processing equipment, built as a compact
CNC Tube Straightening-Cutting Combo Equipment that streamlines uncoiling, straightening and fixed-length cutting into one continuous automated workflow.
Designed as a robust
Pipe Straightening and Cutting Machine, it comes equipped with an advanced CNC control system and premium servo drive components. Working as a precise
Servo-Driven Tube Straightening & Flying Cut Machine, it runs steadily to achieve high-speed, high-precision synchronous processing. Featuring tube chipless cutting, it processes metal pipes without generating scraps, keeping pipe ends smooth and burr-free, avoiding material deformation and waste, and greatly upgrading processing quality.
The machine is tailor-made for coiled metal pipes, finishing automatic uncoiling, accurate straightening and fixed-length cutting in one go. It features stable operation and tight dimensional tolerance, cutting down manual handling and lifting production efficiency effectively. It is widely applied for pipe straightening and cutting in air conditioners, water heaters and other supporting equipment, satisfying the high-standard processing demands of thin-walled metal tubes in the home appliance and refrigeration industries.
3. Main parameters | Item | Parameter and specifications | Note |
| Processing materials | Material | Soft state, semi-hard, copper tube ,Al tube and steel tube | Or equivalent standard products |
| pipe outside diameter and wall thickness | Ф1.8~Ф20,Wall thickness0.2~0.8mm | customized at needs |
| Coil dimensions | Ф900-1100 | |
| Processing capacity | Tube Cutting Number | 2 pcs | |
| Cutting length | Min: 120 mm , Max: unlimited. | No pretensioning if <100 |
| Feeding Stroke | Continuous feed, unlimited length | |
| Productivity | 6 times /min(L=1000) | |
| Precision | Repeat length error | L≤1000 mm≤0.3mm L≥1000 mm ≤0.6mm | |
| The necking rate of inner diameter | f < 20% (Original inside diameter - after-cutting internal diameter) / wall thickness | |
| Flatness | ≤0.5mm (L=1000) | |
| Surface | No significant pull, draw, crushed marks/scratch; No burrs | |
| Environment | Power supply | 3 phase 4 wire 380V \ 50Hz \ 1Kw | Isolation transformer |
| Air pressure | 0.5--0.7MPa | |
Main parts: | CNC or PLC | ICM CNC or Mitsubishi PLC |
| Frequency converter | Mitsubishi |
| Touch screen(HMI) | Mitsubishi |
| Encoder | Nemicon |
| Solenoid | AirTac |
| Proximity switch and sensor | Autonics |
| Low-volt electric parts | Siemens or IDEC |
| Relay | IDEC |
| Lead screw | TBI or NSK |
| Guide rail | THK |
Contact Now